Kleiberit - PVAC-dispersion adhesive

Reversible synthetic resin dispersion adhesives for porous ceramics. Particularly suitable for large-scale ceramics such as historic tiled stoves for museum exhibition purposes with high strength.
 

Properties of the adhesives:

D2 Kleiberit 305 (water-soluble) - 100g D3 Kleiberit 303 (water resistant) -100g
Based on PVAC dispersion
Density: about 1.2 g/m3
pH: 7
Color: Beige
Viscosity at 20 ° C Brookfield RVT Sp.6/20 rpm:
10.000 ± 2.000 mPa ⋅ s
Consistency: medium
White Point: 5 ° C
Open time: about 10 minutes
Labeling: not labeled according to EEC
Based on PVAC dispersion
Density: about 1.2 g/m3
pH: 3
Color: Beige
Viscosity at 20 ° C Brookfield RVT Sp.6/20 rpm:
13.000 ± 2.000 mPa ⋅ s
Consistency: medium
White Point: 5 ° C
Open time: about 6-10 minutes
Labeling: not labeled according to EEC
Properties of the adhesive:
Good moisture resistance
but easily solved by prolonged soaking in water
Very high bond strength
Viscoelastic adhesive film
Properties of the adhesive:
Good moisture resistance
but easily solved by weak acids (vinegar)
Very high bond strength
Viscoelastic adhesive film
Processing:
Bonding surfaces must be dry, free from dust, grease and air-conditioned
Moisture 8-10%
Do not use below +10 ° C.
Stir or shake before use
Application by brush or straight from the bottle
After 10 to 25 minutes, a high strength is reached
Dilution with distilled water is possible, but changes the adhesive properties. If necessary, preliminary tests are recommended.
 
Storage:
 
Kleiberit 305.0 dispersion adhesive is in the original unopened container at 20 ° C approximately 1 year shelf life. The temperature resistance of the glue is in transit at -15 ° C. Thaw before processing carefully to room temperature (20 ° C) and homogenize by stirring.

Options:

Price:

5,94 EUR

19 % VAT plus. excl. Shipping costs

Kleiberit - PVAC-dispersion adhesive