Glue, ceramic glue, Kleiberit, PVAC dispersion glue,

KOREST
Download
Contact
Checkout
Shopping cart »0 Article
You do not have any products in your shopping cart yet.
Wishlist »0 Article
Your wishlist is empty.

Products description

Reversible synthetic resin dispersion adhesives for porous ceramics. Particularly suitable for large-scale ceramics such as historic tiled stoves for museum exhibition purposes with high strength.

Properties of the adhesives:
D2 Kleiberit 305 (water-soluble) - 100g	D3 Kleiberit 303 (water resistant) -100g
Based on PVAC dispersion Density: about 1.2 g/m3 pH: 7 Color: Beige Viscosity at 20 ° C Brookfield RVT Sp.6/20 rpm: 10.000 ± 2.000 mPa ⋅ s Consistency: medium White Point: 5 ° C Open time: about 10 minutes Labeling: not labeled according to EEC	Based on PVAC dispersion Density: about 1.2 g/m3 pH: 3 Color: Beige Viscosity at 20 ° C Brookfield RVT Sp.6/20 rpm: 13.000 ± 2.000 mPa ⋅ s Consistency: medium White Point: 5 ° C Open time: about 6-10 minutes Labeling: not labeled according to EEC
Properties of the adhesive: Good moisture resistance but easily solved by prolonged soaking in water Very high bond strength Viscoelastic adhesive film	Properties of the adhesive: Good moisture resistance but easily solved by weak acids (vinegar) Very high bond strength Viscoelastic adhesive film
Processing: Bonding surfaces must be dry, free from dust, grease and air-conditioned Moisture 8-10% Do not use below +10 ° C. Stir or shake before use Application by brush or straight from the bottle After 10 to 25 minutes, a high strength is reached Dilution with distilled water is possible, but changes the adhesive properties. If necessary, preliminary tests are recommended.

Storage:

Kleiberit 305.0 dispersion adhesive is in the original unopened container at 20 ° C approximately 1 year shelf life. The temperature resistance of the glue is in transit at -15 ° C. Thaw before processing carefully to room temperature (20 ° C) and homogenize by stirring.